PROTECT YOUR CAR DAY AND NIGHT
SAFELY AND EASILY ENABLE PARKING MODE
Power Magic EZ powers your BlackVue from your vehicle’s OBD (On-Board Diagnostic) port.
Power Magic EZ detects when your car’s ignition is off and maintains power to enable Parking Mode while monitoring your battery’s voltage.
When configured voltage level or timer is reached, Power Magic EZ cuts the power to prevent vehicle battery discharge, and resumes when ignition is on again.
PARKING MODE SWITCH
PARKING MODE WHEN YOU NEED IT
Parking Mode Switch ON: Power Magic EZ supplies your BlackVue with power even if the ignition of the vehicle is turned off, until it reaches voltage cut-off or timeout value.
Parking Mode Switch OFF: Power Magic EZ supplies power to your dashcam only when vehicle ignition is on.
LOW VOLTAGE CUT-OFF SETTINGS
PROTECT YOUR BATTERY FROM DISCHARGE
When vehicle’s ignition is off, Power Magic EZ checks your vehicle’s battery voltage periodically while powering your BlackVue.
If power drops below the set cut-off level, Power Magic EZ automatically cuts power to the dashcam, thus saving your vehicle’s battery life.
TIMER CUT-OFF SETTINGS
CHOOSE HOW LONG YOUR DASHCAM STAYS IN PARKING MODE
Power your BlackVue for a preset duration, from 6 hours to infinity.
The timer function is only active when the vehicle’s ignition is off and automatically stops if ignition is on.
* Regardless of the timer setting, the power is cut as soon as the voltage drops below the configured voltage cut-off value.
POWER YOUR BLACKVUE IN PARKING MODE
Rest easy, knowing that your car is being monitored while you are away.
BlackVue dashcams automatically switch to Parking Mode to monitor your parked vehicle, but only writes to the memory card when something happens (motion or impact detected), which has two benefits:
- Less chance for important files to be overwritten during long Parking Mode sessions.
- Extended memory card lifespan in the long run.
||Power Magic EZ
|Rated output voltage
|Output current / Quiescent current
||Rated current 1A, Max. 3A / Under 300µA
|Power cut-off voltage (based on the input voltage)
|Power cut-off timer
||6 hours – infinity
|DC connector type
||DC 12 V-24 V (DC Plug: (-)–C–(+) (Ø3.5 x Ø1.35))
||5 meters (16.4 feet)
||Compatible with all types of vehicles (including hybrid). OBD CAN bus* required.
(*) CAN bus is included in the OBD port of most vehicles sold since 2008.